There are some common assumptions that many of us take on good faith, and when it comes to buying a home, those assumptions could end up leaving us with the burden of expensive, unanticipated repairs. It isn’t just a matter of the previous owner neglecting to keep up with maintenance, but even they could have purchased the home with numerous undocumented or compliance issues.
Planning permission issues in Ireland are unfortunately quite common, and thousands of homes have all sorts of issues, such as unauthorised works. Naturally, these issues can be quite problematic, and you may be subject to consequences such as issues with your mortgage drawdown, non-compliance with your home insurance policy, face difficulties for future planning applications, and the eventual resale of the home down the line.
A professional pre-purchase survey conducted by qualified engineers and surveyors can identify these issues before you finalise the transaction, giving you peace of mind that you’re getting a fair deal for the property and are aware of any necessary or desired remedial works that must be completed.
Why Planning Permission Issues Are Common in Second-Hand Homes
Homeowners commonly assume that small projects don’t require any planning permissions. Perhaps a little shed in the rear garden is no issue, but building a large, habitable granny flat is another story entirely. It could also be the case that older projects were completed long before (or just before) planning rules were established or tightened, so they may predate current planning compliance. If a project was completed under “exempted development,” it isn’t necessarily compliant – it may be provided that specific conditions have been met, which is often overlooked by homeowners.
Planning compliance for second-hand homes is essential for catching any such works. Things like attic conversion planning permissions in Ireland can be fairly strict, and usually for good reason, but that still doesn’t stop a lot of homeowners from going ahead with full conversions and ignoring any required certifications.
If the previous owner (or even earlier owners) made such changes, the liability still falls upon you, the buyer. A professional engineer report can help you catch things like unauthorised extensions in Ireland and sort out any pre-purchase survey planning problems before you make a deposit and finalise the purchase.
Common Planning Permission Problems Found in Pre-Purchase Surveys
What are the most common pre-purchase survey planning problems that prospective homebuyers and engineers in Ireland come across? Here are a few of the top ones:
1. Unapproved Extensions
Sometimes, single-storey and two-storey extensions are built without the requisite planning permissions. Other times, extensions are not built in compliance with the building code (e.g. Building Control Act, 2014) or their usage is not in line with permitted utilisation as per zoning laws or local council planning authorities.
Extensions which exceed exempted development limits or have poor documentation, or worse, are missing certifications altogether, can hamper future extension plans and, in some cases, may need to be demolished.
2. Attic Conversions Done Without Compliance
Attic conversion planning permission in Ireland is fairly strict when it is required. In many cases, it is considered an exempted development so long as the conversion does not drastically alter the external appearance of the roof and no structural changes are made to the roof. Basically, things like adding insulation or carpet, or fitting a Velux window to the rear of the roof, do not require planning permission.
Converting an attic into a habitable space usually does require planning permissions, and they’re always necessary when making structural changes to the roof such as adding a gable or adding a window to the front or sides of the roof. Non-compliant attic conversions often lack structural approval, can pose serious fire safety breaches as there are non-compliant escape routes, and they’re often listed on rental websites as “bedrooms.”
3. Garage Conversions Without Permission
A garage is intended to store your vehicle and be a non-habitable space, although it’s fairly common to store belongings there. Small changes to a garage often don’t need planning permission, but significant changes do. Things like changing its intended use (e.g. converting it into a living space) normally involve significant work, as garages are typically not insulated or structurally sound for uses other than storing vehicles.
Homeowners with a converted garage may face challenges such as having the home’s BER certification affected, issues with their home insurance policy, or getting mortgage approval.
4. Altered Internal Layouts
One of the most common planning permission issues in Ireland is a home with an altered layout. Again, marginal changes like decor or painting interior walls are no big issue but tearing down a load-bearing wall or making changes to the foyer or staircase, for example, requires adequate planning permission.
Structural changes like these can affect the structural integrity of the home, affect fire escape routes, and the work may or may not be in compliance with the building code.
5. Boundary Changes or Encroachments
Property conveyancing and the legal transfer of land entail verifying the property cadastral and its boundary lines. While it’s just invisible lines on a map, there are real-world implications that sometimes get blurred over the years. Gardens or fences may be located incorrectly and encroach on adjacent properties or public right-of-way or easements. Shared walls could be modified incorrectly and cause encroachment of one property onto another.
Planning compliance for second-hand homes involves verifying all of these important matters so as to avoid issues from solicitors and, quite likely, property disputes that may arise in the future.
6. Windows or Doors Changed Without Permission
Adding new windows or doors might not seem like such a big deal, but they do affect the structural integrity of a home as they enlarge openings and modify the load-bearing characteristics of the home. Adding a window or door (or multiple) requires permission, not only for structural reasons (important) but also for privacy reasons. Side-facing windows overlooking neighbouring properties could be considered a violation of privacy by local planning authorities.
Replacing an existing window does not require planning permission, but installing a new window in an opening made to an existing wall does. Some exceptions exist, but non-compliant windows and doors can invalidate exempted development status.
7. Non-Compliant Sheds / Outbuildings
A little shed, greenhouse, or other ancillary building does not generally need permission so long as it’s erected in accordance with Planning and Development Regulations. What sometimes happens, however, is that homeowners exceed these regulations and build a shed that’s too large, for example.
Outbuildings such as sheds must not be located in the front garden (only the rear garden), exceed 3m (flat roof) or 4m (pitched roof) in height, or be used for habitable purposes. Granny flats and rental units, commercial activities, and storage of poultry or livestock are prohibited and homeowners must apply for planning permission for any of these non-conventional uses of outbuildings on their property.
Why Planning Compliance Matters for Buyers
Planning compliance is something that prospective homebuyers might assume falls on the current homeowner (the seller), so it’s nothing to worry about. This is not the case at all; homebuyers are responsible for the actual condition of the home, which could include inheriting a laundry list of issues from previous owners and one or more cases of non-compliance.
Some of the potential issues that a homebuyer may face include:
Stalling your mortgage drawdown
Void insurance policy or higher premiums
Solicitors telling you not to purchase the property or refusal to sell
Planning retention and the potentially high costs of regularisation
Lower resale value
Challenges getting planning permission for future works
Once you’ve finalised the purchase of the home, all of these could come back and hit you with a vengeance. A pre-purchase survey helps you avoid them.
How a Pre-Purchase Survey Identifies Planning Problems
Pre-purchase home surveys are thorough and comprehensive, looking at all essential elements of a property, inside and out. Engineers check for the following during an inspection:
That all physical structures located on the property match with planning records
If works fall under exempted development and are valid
If there are visible structural risks due to illegal modifications
That there is adequate attic safety, presence of fire escape routes, and sufficient structural support
Boundary lines are correct and in accordance with cadastral mapping, and that there are no encroachments
The presence of poor workmanship, which often means DIY or unauthorised builds
Compliance with Irish Building Regulations
Homebuyers get full clarity before finalising the purchase of their new home, and a pre-purchase survey gives peace of mind and can help them renegotiate the sale price, request retention from the seller, or simply to walk away from the transaction.
When You Need Planning Regularisation (Retention Permission)
Planning regularisation (or retention permission) is a process which lets homeowners apply for planning permission after works have been completed which did not have the requisite permission. To deter people from making unauthorised alterations or modifications to their property and doing this instead of requesting planning permission properly in the beginning, the fee for applying is three times higher for retention permission.
Just like with normal planning permission applications, retention permissions are not automatically guaranteed, although a large majority of applications do get approved. The local planning authority uses the same criteria to assess the application, and the timeline may be the same provided that you’ve submitted everything accordingly and the works are compliant with all relevant standards.
Avoid Costly Planning Permission Mistakes and Retain a Pre-Purchase Survey in Cork from BCE Consulting
There are many visible issues that could become your responsibility when purchasing a second-hand property, and a great deal of invisible ones that could end up costing you potentially tens of thousands of euros to remediate.
Planning issues are important to know about, ideally sooner (before signing any contracts) rather than later (after the key is in your hands!). Pre-purchase surveys are the best way to confirm any existing planning compliance problems before spending your hard-earned money, and they give you peace of mind about the actual (not stated) condition of the home.
A pre-purchase survey is not a legal requirement to buy a home in Ireland, but it may be mandated as a condition of applying for a mortgage with your bank or financial lender. Many Irish homebuyers incorrectly assume that their bank will tell them specifically which survey they need, so it’s important to understand the bank’s requirements and to commission the correct type of survey for your desired home.
Although around 60% of Irish homebuyers do commission a pre-purchase survey of their own volition, many banks are now increasingly asking buyers to get one done in order to qualify for a mortgage and to lessen their own risk.
In Ireland, there is a principle of caveat emptor, “buyer beware,” which means that the buyer is responsible for any issues detected after closing the transaction and becoming the legal owner of the property. If there are no issues, then it’s no worry. In many cases, however, there are several issues which can cost thousands of euros to remediate and as the buyer, you’ll have to foot the bill for it all.
What Banks Check vs What Engineers Check
What do banks check during a valuation when you apply for a mortgage for a home, and what do engineers check during a pre-purchase survey? In short, they tend to check for two very different things. Here is a detailed breakdown of what banks check during a property valuation, compared to what an engineer looks for during a pre-purchase survey:
Bank Valuation
The market value of the home, in relation to surrounding properties, market trends, and the visible condition of the home.
A quick visit (perhaps 15-30 minutes, sometimes even remotely) to inspect the condition
The survey asses the bank’s risk for the collateral (the home) to approve/deny a mortgage loan
Does not entail any structural inspection beyond surface-level
Does not identify defects with the property which could detract from its value
Pre-Purchase Survey
A full structural inspection, including all relevant elements, e.g. structural integrity, plumbing, electrical, HVAC, etc.
Mainly done to protect the buyer against making a poor purchase or paying too much for a property full of defects
Identifies all necessary and remedial works to be done, including any defects, dampness, structural problems
Identifies compliance issues which could be problematic with local planning authorities, e.g. unauthorised sheds, attic conversions, etc.
Can be used to renegotiate an offer from a seller or simply to walk away from the transaction
In brief, a bank valuation estimates the market value of a property for the purpose of lending, whereas a pre-purchase survey assesses the actual condition of a property, primarily for the purpose of informing the buyer of any defects.
Do Banks Require a Pre-Purchase Survey?
Banks and financial lenders in Ireland do not legally require a structural survey, but it is common for them to encourage buyers to get one for their own benefit. Furthermore, some lenders are now asking mortgage applicants to retain a pre-purchase survey, especially for older homes. Homes built before 1963 or that are 80-100 years old (or even older), or that have visibly deteriorated, often require a pre-purchase survey as a condition of being approved for a mortgage loan.
Generally, the idea is that banks cannot and will not force you to pay for a pre-purchase survey, but in the likely event that one or more defects are found after the purchase, it is the buyer’s full responsibility.
Several of the biggest banks in Ireland have the following recommendations with regards to pre-purchase surveys:
AIB: pre-purchase survey is recommended, but not mandatory
Bank of Ireland: only a property valuation is required
PTSB: only a property valuation is required
Credit Unions: most recommend a pre-purchase survey, all require a property valuation
Why Solicitors May Require One
A solicitor is needed when purchasing a property in Ireland as they provide essential services such as conveyancing, legally transferring the title, and ensuring that the transaction and the property itself is compliant. Compliance is important and it’s fair to have doubts, so a solicitor may require you to retain a pre-purchase survey before proceeding with the conveyancing.
Reasons why a solicitor may need one include:
It protects you, the buyer, from inheriting issues which can be potentially very costly
It ensures that any existing extensions or alterations to the property are compliant
It avoids any implications that may arise with your title or home insurance
It identifies any boundary problems such as encroachments
It is part of their own due diligence and for yours, especially as a first-time homebuyer
It gives you peace of mind and clarity about the actual, not stated, condition of the home
Risks of Skipping a Pre-Purchase Survey
If around 3/5ths of Irish homebuyers get a pre-purchase survey, even when it isn’t a legal requirement, then what does that say about the other 2/5ths? For some, it’s a little bit of money saved, assuming there is nothing out of the ordinary with the home. For many, it’s a costly affair to have to repair and maintain all sorts of unanticipated problems, all of which wouldn’t be your responsibility if you had gotten a pre-purchase survey!
Some of the hidden issues that can be identified by an engineer or surveyor during a pre-purchase survey include:
Presence of dampness and mould
Structural damage and cracks, e.g. foundation walls
Rot or deterioration of the roof
Non-compliant extensions and other works
Fire safety issues
Boundary encroachments
Some problems, like a faulty bathroom fixture, might only cost you a couple hundred euro. A rotten roof with rafters precipitously in need of replacement could easily run you tens of thousands. Skipping a pre-purchase survey could leave you paying far more than anticipatedlater on, so don’t skip the survey and save yourself the headaches.
How a Survey Helps with Mortgage Approval
Banks and other mortgage lenders in Ireland want to be sure that the collateral asset, your desired property, is worth approximately what they determine in their valuation report. A home with several major issues could drastically reduce the value of the property and make it far riskier for the bank to approve a mortgage.
Some of the indirect benefits of a pre-purchase survey for mortgage approval include:
It identifies issues sooner rather than later, allowing for remedial works to take place if necessary
It allows the buyer to renegotiate the offer with the seller, either reducing the cost by the estimated amount or having the seller perform these repairs at their own expense as a condition of the sale
It prevents mortgages from being denied due to structural problems, since all issues are laid out before the contract is signed
It shows mortgage lenders that the property is a sound long-term security
It makes the mortgage drawdown process simpler and clearer
When You Need a Snag List Instead
While pre-purchase surveys are common for second-hand homes in Ireland, don’t mistakenly think that new build homes are safe from issues. Naturally, second-hand homes have wear and tear and accumulated damage which a pre-purchase survey can identify, but a new build can have several issues such as non-compliance with building standards and regulations. Structural problems are not as likely (but still possible) on a new build, but things like finishes or poor quality of workmanship can still become inherited by you, the buyer, after the purchase is concluded.
For new builds, a snag list is a similar type of survey that consists of periodic inspections to a building site of either a new build home or a renovated home. It identifies:
Poor quality workmanship
Missing or incomplete fittings
Cosmetic flaws and issues
Ventilation or compliance problems
As with pre-purchase surveys, a snag list does not replace a bank’s valuation report. Instead, it gives homebuyers clarity and allows them to renegotiate the sale of the property, request that the seller’s contractors remediate any issues detected, or to step away from the transaction altogether.
Retain a Pre-Purchase Survey or Snag List in Cork from BCE Consulting
Whether you’re planning on buying a new or second-hand home, any number of issues could be hidden away from the seller (intentionally or not). In Ireland, any such problems become your responsibility once you legally own the property, so the best way to avoid headaches and having to fork over potentially tens of thousands of euros on remedial work is to retain a pre-purchase survey (for second-hand homes) or a snag list (for new builds) from a qualified engineer or surveyor in Cork such as BCE Consulting.
Banks don’t require you to get one, but many recommend it, strongly even, and it is one of the smartest decisions an Irish homebuyer can make. Protect your investment, make fairer negotiations, and avoid costly surprises by getting a pre-purchase survey or snag list from BCE Consulting today.
There is currently a building boom taking place across county Cork with new estates under construction in and around the city. These beautifully designed A-rated homes are incredibly popular with first time buyers and those looking for a forever home to build a family in. While all of these homes are being constructed by well-respected contractors and building firms, it is still essential to commission a snag list inspection before moving into your new home.
A surge of modern, energy-efficient homes across the county
As we all know, the people of Ireland are eager for new homes and an end to the current housing crisis that has been wracking the country for years now. Despite slow growth, there are currently quite a few new housing projects under construction across Cork City and county, all within easy commuter distance to Cork City Centre.
There are a number of developments under construction or coming onto the market across Cork with a great mix of boutique estates and large-scale developments. We have compiled a list of these new housing developments across Cork below.
Rae an Mhionnain, Minane Bridge
Rae an Mhionnain is being marketed as the estate “Where modern living meets village charm” and we could notagree more with that description. This boutique housing estate is comprisedof A rated 3-to-4-bedroom homes in MinaneBridge, close to Carrigaline, the city, and just a stone’s throw away from some gorgeous beaches.
Blossom Hill, Bloomfield, Midleton
This new large estate in Midleton is being developed by Castlerock Homes. It is made up of detached andsemi-detached A2-rated homes. These lovely new homes are ideal for families looking for energy-efficient living near Midleton
Glenwood, Strawhall, Fermoy
Fermoy is an up-and-coming town located on the banks of the Blackwater along the M8, just 40 minutes north of Cork City. This new development is located right on the edge of town, giving you access to all the best Fermoy has to offer. The Glenwood, Strawhall estate is made up of A2 rated 3- and 4-bedroom homes with air to water heat pumps for under floor heating and hot water.
Arderrow, Ballyvolane
The Arderrow housing development is ideal for buyers looking to have the best of city life while living in a new modern estate. Located just 3km from Cork City Centre, this estate is comprised of beautifully designed A-rated homes just minutes away from local amenities such as shops, GAA clubs, and the Blackpool Shopping Centre.
Blossom Hill, Bandon
This new development is located on the edge of Bandon Town and is comprised of an array of 2-bedroom town houses, 3–bedroom terraced homes, and 3- and 4-bedroom semi-detached houses. With your proximity to town, this estate gives you the best of both town and rural living.
Bayly, Douglas
Douglas is an incredibly popular suburb of Cork City, and this new development near Maryborough Hillgives you the opportunity to purchase and spacious A2 rated home in this area. Some of these homes have stunning views of Cork City and beyond but all are built with energyefficient features such as LED fittings, dual zone heat pump heating systems, and high-performance windows.
Maple Woods, Ballinacurra, Midleton
This new development just minutes away from Middleton features beautiful open plan 2,3, and 4 bed homes. These A rated homes are just a 7 minutes’ drive from Market Green Shopping centre and a 30-minute drive from Cork City Centre.
Castletreasure, Douglas
This high-end development is bringing A2 rated 3 and 4-bedroom homes onto the market in Douglas. The development was designed with the natural landscape in mind and existing hedgerows and trees were kept in the final design. These eco-friendly homes may make you eligible to apply for a green mortgage.
Why a Snag Inspection Still Matters Even for New Builds
New build properties are popping up across Cork City and County, many within easy access to Cork City Centre. Even though these homes are expertly crafted, a snag list inspection is still essential before moving into your new home.
The houses in these new housing developments in Cork are all top of the line, expertly constructed with some of the best modern amenities. However, that doesn’t mean that the construction is flawless which is why a snag inspection is still essential for spotting minor issues before the handover.
What a snag inspection is
A snag list inspection is a thorough inspection of both the outside and inside of a home identifying poor finishes, defects in the construction and materials, and issues with workmanship. When compiling a snag list inspection, an engineer will go from room to room, inspecting each element of the space and creating a detailed list of issues which will be handed over to the builder to rectify before the home is turned over to the buyer.
Common issues found in new homes
In our experience performing snag list inspections across Cork, you truly never know what you will find which is why we always make sure to thoroughly inspect each property, keeping our eyes peeled for the unexpected. That being said, there are a couple of common issues that we generally find in new homes such as:
Uneven finishes
Cracked plaster
Messy paintwork
Insulation gaps
Poor joinery
Roofing and gutter problems
Door and window defects
Plumbing and electrical defects
Builder snag lists vs. independent inspections
Most builders will carry out their own internal checks before handing over a property, and while this is absolutely a positive thing, it shouldn’t replace an independent snag inspection. A builder’s check is designed to confirm that the home is finished to their own internal standards, but an independent engineer’s job is to represent your interests alone.
An engineer has no stake in the build, no bias, and no reason to overlook something that may seem “minor” but could become an issue down the line. They also bring a fresh set of eyes. After months on a project, it’s very easy for even the best builders to become used to certain details or miss cosmetic imperfections.
An independent snag list ensures you’re getting a completely objective assessment of your new home, with clear documentation of anything that needs attention before you take possession of the keys. It’s one of the simplest and most effective ways to protect both your investment and your peace of mind.
When to Book Your Snag Inspection
Booking a snag inspection at the right time is just as important as booking one at all. If it’s done too early, the builder may not have finished enough of the property for an inspection to be meaningful. If it’s done too late, you risk issues becoming harder or slower for the builder to address.
Best timing
The ideal time to book is after practical completion but before you sign contracts or finish closing. At this stage, the house should be fully built, cleaned, and ready for inspection, but it is still under the builder’s responsibility. This gives both you and the builder the space to address any issues without holding up your move-in date.
What’s included in the report
After the snag list inspection, you’ll receive a clear, detailed report outlining each issue found in the property. This normally includes photographs, descriptions of the defect, recommendations on what needs to be done, and a list summarising all items that require attention. Many homeowners find this incredibly helpful when communicating with their builder, as it removes the stress of trying to remember or explain issues themselves.
Benefits of acting early
By arranging your snag list well in advance of moving in, you avoid delays and ensure the builder has sufficient time to complete all repairs. It also means you step into a home that’s truly ready for you instead of one you need to chase small fixes on after the fact. Acting early helps you start your new chapter on the right foot, without lingering annoyances or loose ends.
Local Expertise You Can Trust
A local engineer will have in-depth knowledge of regional building practices and some of the common issues that crop up with local builders in Cork.
Choosing an engineer who knows Cork’s developments, builders, and housing trends makes a world of difference. Each new estate has its own construction quirks, layout considerations, and finishing styles, and someone who works locally will have already seen these patterns across multiple sites.
A Cork-based engineer also understands regional building practices, planning requirements, and the common issues that tend to crop up in certain areas whether that’s related to local soil conditions, materials used, or how certain homes are finished in particular estates.
Cork-based insight
Our engineers have carried out inspections in many of the developments mentioned above, as well as across numerous other estates around the city and county. This firsthand experience means we often know what to keep an extra eye on before we even walk through the door, allowing for a more thorough and efficient inspection.
Why local knowledge matters
Local knowledge helps ensure nothing is overlooked. It means understanding which builders tend to deliver immaculate finishes and which require a closer look, noticing recurring patterns in certain house types, and being familiar with how various estates have been serviced and completed. This level of insight is incredibly valuable for new homeowners who want reassurance that their property is finished to the highest standard.
A thorough, independent inspection gives you confidence, clarity, and the reassurance that your home has been checked professionally from top to bottom. It’s a simple way to protect your investment and make sure your first days in your new home are spent enjoying it, not finding things that need fixing.
Moving into a new home in Cork? Protect your investment.
In Ireland, we seem to have a bit of an obsession with buying new homes. There are a lot of reasons for this, the quality, location, and even availability. But one of the top reasons new build homes are so highly desired is that they are supposed to be in excellent condition when purchased, essentially defect free.
When you buy a new build home the process should be relatively worry free, but as professional engineers providing snag list inspections in Cork City and beyond, we see a surprising number of hidden problems in new build homes. We’ve gone ahead and compiled a list of the most common issues with new builds that we encounter to help you know what to look out for when you are buying a new home.
Cosmetic vs. Structural Defects
You don’t need to be a member of Engineers Ireland like our team at BCE in order to notice some of the most common new build defects as most of these are simple cosmetic issues. But when it comes to structural issues, that’s when you’ll be glad that you hired a professional engineer to conduct a snag list on your property.
Common cosmetic issues are easy to spot. They include issues like poor plastering, cracked tiles in your new bathroom or kitchen, and paint defects like splatters or paint marks in odd places. These new build defects are both easy to spot and simple to rectify. However, when it comes to identifying structural issues, you will need the assistance of a qualified engineer.
Common structural issues include problems such as cracks caused by subsidence, uneven flooring, and misaligned roof installation. Subsidence is an especially common issue in places like Cork and Dublin where homes are built on clay-rich soil. This is one of the many reasons why it is imperative to commission a topographic survey before you begin a building project to help mitigate these sorts of issues in the future.
Plumbing & Heating Problems
Plumbing and heating issues are surprisingly common defects in new build homes. Plumbing issues appear in the form of poor water pressure and leaks. Hidden leaks are particularly insidious as if left unchecked, they can cause serious issues with the structural integrity of your home not to mention health problems caused by mould growth and damp.
Without a snag list survey, heating issues can often go undetected until the colder months when the heating is first turned on. At that point, your new home is not heating up properly when you need it to most. Luckily, these new home issues are all fairly simple fixes if caught early.
Electrical Defects
Electrical defects in new build homes can be easy for buyers to miss as they are often only discovered by homeowners after they have settled into a home. Professional consulting engineers know to look out for loose fittings, poor socket placement, and perhaps most importantly, the lack of professional electrical certification.
All electrical works completed in Irish homes and businesses must be carried out by electricians certified by Safe Electric Ireland. In addition to this, there are multiple certifications that new build homes must have to make sure that they comply with electrical and safety standards. These include certificates like the Electrical Installation Completion Certificate (EIRC), which certifies that the electrical works in a home have been completed up to code, and the property is now safe to connect with a Distribution System Operator Network.
Compliance here is imperative not only for the safety of your new home and its inhabitants but also for insurance purposes. If there are any electrical issues in your home and it is discovered that these certificates are missing, your home insurance will most likely be null and void.
Energy Efficiency & Ventilation Issues
Missing insulation is a very common issue we find in new builds and is something that is so easy for new homeowners and construction teams to miss. The only thing worse than finding an insulation issue in a snag list inspection is forgoing the inspection entirely and going years without realising that your home is not properly insulated. Insulation issues can cause high utility bills and cold spots around the home. Gaps in insulation are most commonly found in the attic or around attic hatches, windows, or pipework.
Not only does missing or poorly installed insulation cause heat loss reducing the energy efficiency of your home, but it can also ventilation issues which can cause damp. This leads to mould growth, and if left long enough, can even go so far as to cause structural issues in your home.
Conclusion
Just because you are purchasing a brand-new home doesn’t mean that you are purchasing a home without issues. Things can go awry in the building process which is why it is important to get an experienced engineer to inspect the property before you move in to catch any issues that may have been overlooked.
If you are moving in to a new build home, a professional snag list inspection can give you the peace of mind that your home is safe, compliant, and finished to a high standard. Get in contact today with our team at BCE to book.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Recent Comments